Board moving PCB separator

YS-830 LED light strip pcb separator

Board-moving type PCB separator YS-830,can cut: aluminum based board, FR-4, glass fiber board and PCB, etc.
Be dedicated to the separating of aluminum based light bar, high efficiency, long life, without deformation and burrs, greatly saving labor and improving company benefits.


Categories:
Share Button

Product Description

Application
Materials of board to cut: aluminum based board, FR-4, glass fiber board and PCB, etc.
Be dedicated to the separating of aluminum based light bar, high efficiency, long life, without deformation and burrs, greatly saving labor and improving company benefits.
 
Features
1. The board-cutting is done by 6 blades, and the upside one and the downside one for a cutting unit. So there are Group A, B and C. The whole cutting process is divided into 4 stages. The stress of the cutting process can be reduced by 80% than the traditional one-cut process for the small cutting quantity each time. And the edges of the board are quite smooth after cutting.
2. The cutting process is very stable because of multiple cutting. Even for circuit boards with shallow microgroove.
3. As the low cutting force of the blade, it can prolong the working life of the blades and reduce the cost.
4. Suit for cutting LED aluminum based board, copper substrate, light-emitting tube, light board, display pane, etc.
 
 
Advantages
1.6 blades, a pair of upper and lower blades as a cutting unit. A, B, C three pairs. Cutting process includes four parts. Less stress is generated due to small cutting length in each part, reducing over 80% stress. Separated circuit board has neat edge and smooth surface.
2.Multiple cutting makes cutting stable, largely improved positioning of V-CUT. V-CUT even with small depth won’t break away from PCB board.
3.Less stress on blades, prolonging blade service life, thus reducing cost.
4.Applicable for LED aluminum board, copper board, luminous tube, light bar, display board, etc.
 
Specifications
Voltage: 220V/110V, 50/60Hz, 40W
Max cutting length: Unlimited
Feeding speed: 80, 120, 200, 300mm/s
Applicable thickness: 0.5-3mm
Size (main engine): 540*280*240mm
Size (whole machine): 1250*400*240mm
The feeding plate can be lengthen, the length of the extended board is 600mm per piece (official accessories is three pieces).
Weight: 36KG
Board-feeding efficiency: for 1200mm aluminum based board which has 10 small boards on it, it can cut 2.5 boards in a minute.
Storage temperature: -20~50℃
Working temperature: 10~35℃
Limited: the distance between the parts on board and the microgroove should be above 1mm; the side width is unlimited.
 
Parameters

Power 220V 50HZ
Voltage 40W
Cutting thickness 0.5-3.0 mm
Maximum Cutting length Unlimited
Machine Size 300*230*220 mm
Whole Size 800*370*220 mm
(Feeding plate can be customized)
Weight: About 36kg
Storage temperature -20~50℃
Working temperature 10~35℃
Blade material SKD-11 high-speed steel material from Japan
Cutting Materials aluminum based board, FR-4, glass fibre board and PCB, etc.
Feeding efficiency 2.5 pcs in a minute (1200mm pcb with 10 pcs pcb boards)
Limit: the distance between the parts on board and the microgroove should be above 1mm; the side width is unlimited

 
Back to Top